| High Light: | Oil Removal Filter 1/2",Coalescing Air Filters,Oil Removing Air Filters |
||
|---|---|---|---|
Oil Removing Precision Filter
Description
Filter performance characteristics
1. Manufactured in accordance with ISO9001 standards;
2. The shell is specially treated with high-strength fluorocarbon and has a service life of up to 10 years;
3. Advanced modular design, the filter element and shell are relatively independent;
4. The pore volume and passage ratio of the filter element are large, and the pressure of the filter element is reduced, saving every penny for customers;
5. High dust holding capacity and high durability of the filter element;
6. Intelligent digital pressure difference display indicates the best time to replace the filter element and reduces pressure drop;
7. Reliable drainage, zero loss, and intelligent control;
8. The automatic drain valve is standard configuration and is used to drain the collected condensate. (AR only,
AAR and ACS are manual drain valves)
| Oil removing precision filter technical parameters | |||||||
| MODEL | Air pipe diameter | Air handling capacity(m³/min) | Dimensions(mm) A H H1 |
Weight(kg) | Filter element/quantity | ||
| Threaded interface | |||||||
| BF0005(G) | DN20(G¾") | 0.8 | 100 | 270 | 26 | 1.1 | BE0005 |
| BFO010(G) | DN20(G3¾*) | 1.8 | 100 | 270 | 26 | 1.4 | BE0010 |
| BF0020(G) | DN25(G1") | 2.8 | 100 | 270 | 26 | 1.5 | BE0020 |
| BF0030(G) | DN25(G1") | 3.8 | 115 | 340 | 40 | 2.6 | BE0030 |
| BF0040(G) | DN40(G1½*) | 5.5 | 115 | 380 | 40 | 3.3 | BE0040 |
| BF0060(G) | DN40(G1½*) | 6.8 | 115 | 380 | 40 | 3.5 | BE0060 |
| BF0080(G) | DN50(G2*) | 8.8 | 135 | 690 | 50 | 4.5 | BE0080 |
| BF0100(G) | DN50(G2") | 11.5 | 135 | 690 | 50 | 4.8 | BE0100 |
| BF0120(G) | DN65(G2½*) | 14 | 160 | 870 | 65 | 10 | BE0120 |
| BF0150(G) | DN65(G2½*) | 19 | 160 | 870 | 65 | 12 | BE0150 |
| BF0250(G) | DN80(G3) | 28.5 | 220 | 790 | 184 | 17 | BE0250 |
| Flange interface | |||||||
| BF0300(F) | DN80(F3) | 35 | 400 | 1036 | 170 | 48 | BE0300 |
| BF0400(F) | DN100(F4) | 45 | 459 | 1076 | 170 | 51 | BE0400 |
| BF0500(F) | DN100(F4) | 55 | 565 | 860 | 670 | 68 | BE0250X2 |
| BF0600(F) | DN125(F5) | 65 | 565 | 1150 | 965 | 120 | BE0300X2 |
| BF0800(F) | DN150(F6) | 85 | 570 | 960 | 817 | 130 | BE0400X2 |
| BF1000(F) | DN150(F6) | 105 | 570 | 1250 | 993 | BE0300X3 | |
| BF1200(F) | DN200(F8) | 120 | 670 | 1010 | 820 | BE0400X3 | |
| BF1400(F) | DN200(F8) | 140 | 670 | 1045 | 895 | BE0300X4 | |
| BF1600(F) | DN200(F8) | 160 | 670 | 1226 | 1036 | BE0400X4 | |
| BF2000(F) | DN250(F10) | 200 | 800 | 1366 | 1128 | BE0400X5 | |
| BF2500(F) | DN250(F10) | 250 | 800 | 1420 | 1178 | BE0400X6 | |
| BF3000(F) | DN300(F12) | 300 | 950 | 1268 | 996 | BE0400X7 | |
| BF3600(F) | DN300(F12) | 360 | 950 | 1500 | 1220 | BE0400X8 | |
| Correction coefficients under other pressures are shown below : | |||||||||||
| Working pressure | 1 | 2 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 20 |
| Pressure coefficient | 0.38 | 0.53 | 0.65 | 0.85 | 1 | 1.13 | 1.25 | 1.36 | 1.46 | 1.56 | 1.7 |
Working conditions and technical indicators
Maximum working pressure :<1.6MPa
Recommended maximum operating temperature :<66 ° C
Recommended minimum operating temperature :<1.5 ° C
Contact Person: Mr. Andy
Tel: +8613812770303
