3/4" Compressed Air Inline Coalescing Oil Removing Filter

Oil Removing Precision Filter
 
Description
 
Air filtration principle
Gas and liquid filtration operate on completely different principles, as particles behave significantly differently in air and liquid. Integrated liquid mainly relies on "blocking"; and the key to effective air filtration lies in three basic filtration principles:
1. "Directly capture" larger and heavier particles that move in a straight line;
2. "Inertial collision" is used to capture particles that are smaller, lighter and change direction slightly with the airflow;
3. "Brownian motion" Very small particles are filtered out due to "Brownian motion". Once the particles hit the fiber, they are firmly attracted by van der Waals forces, electrostatic attraction and vacuum suction. According to research, for depth-type air filtration, as long as it can completely filter out particles of 0.03μm, it can filter out particles of 0.01μm size.
 
Filter element classification
AO grade primary filter
Used to remove particles above 1μm, and can condense liquid oil and water. At 21℃, the oil mist content does not exceed 0.5mg/m (PPM)
AA grade fine filter
Used to remove dust particles larger than 0.01μm including oil and water. Under 21C conditions, the oil mist content does not exceed 0.01mg/m3 (PPM) (requires pre-AO level)
AX level high efficiency filter
Used to remove particles larger than 0.01μm including oil and water. Under 21C conditions, the oil mist content does not exceed 0.001mg/m (PPM) (requires pre-AO level)
AR grade universal dust filter
Used to remove dust particles above 1μm (after placing in the suction dryer)
ACS grade activated carbon filter
Used to remove oil vapor and hydrocarbon odors,
Under 21C conditions, the oil mist content does not exceed 0.003mg/m (PPM) (excluding methane, requiring a pre-AO level)
AAR grade high efficiency dust removal filter
Used to remove dust particles above 0.01μm. (Place it after the vacuum dryer)
  
Working conditions and technical indicators
Maximum working pressure :<1.6MPa
Recommended maximum operating temperature :<66 ° C
Recommended minimum operating temperature :<1.5 ° C