- Categories:IndustryNews
- Author:超级管理员
- Origin:
- Time of issue:2022-06-05 12:48:39
- Views:0
(Summary description)During the use of the customized Skid Mounted Nitrogen Gas Generator for Pharmacutical, Oil Well, users need to maintain it regularly, because regular maintenance can avoid some minor problems with the equipment. Let's talk about the correct maintenance method.1. The drying tube in the customize
During the use of the customized Skid Mounted Nitrogen Gas Generator for Pharmacutical, Oil Well, users need to maintain it regularly, because regular maintenance can avoid some minor problems with the equipment. Let's talk about the correct maintenance method.
1. The drying tube in the customized Skid Mounted Nitrogen Gas Generator for Pharmacutical, Oil Well should be replaced regularly. When 50% of the discolored silica gel in the drying tube is discolored, the internal packing should be replaced. Replacement method: Turn off the power, and bleed the system gas (pressure drop to zero). Unscrew the purification tube in the direction indicated by the arrow, unscrew the end cap of the purification tube, and replace the silica gel desiccant.
2. When replacing the desiccant, it should be noted that all the absorbent cotton is put into the tube to ensure that it has no effect on the sealing end face, so as to ensure that the end cap can be sealed after tightening.
3. When installing the customized Skid Mounted Nitrogen Gas Generator for Pharmacutical, Oil Well, screw it in the direction shown by the arrow. After starting the machine, use soap to check for leaks and ensure that it is sealed.
4. It is not allowed to wrap various sealing tapes on the thread surface of the drying pipe without authorization, otherwise the drying pipe will be cracked and cannot be sealed.
5. The electrolyte is consumed during the operation of the customized Skid Mounted Nitrogen Gas Generator for Pharmacutical, Oil Well, and distilled water should be replenished regularly according to the usage conditions to ensure that the liquid level is between the upper and lower limit scales.
6. The equipment does not consume KOH, but it is recommended to replace the electrolyte every six months. When replacing the electrolyte, first extract the waste lye in the nitrogen generator, add distilled water, start the instrument, let the system clean the electrolysis system for about 5-10 minutes, and then extract the Distilled water is added to the prepared new electrolytic lye.
